The Toro TRX26 walk-behind trencher redefines dedicated walk-behind trenchers, setting a new standard for ease of use – so intuitive and simple to operate with its TRX control system. It works faster and straighter than you would expect from a walk-behind trencher. The track drive design provides a low centre of gravity and a large light footprint, offering stability and increased maneuverability – without causing damage to existing turf. The TRX26 walk-behind trencher also makes valve box installation a snap with its ability to cross-trench without damaging trench sidewalls.
Model #
22974
Engine
26hp Kawasaki FX730V, 4 cycle air cooled
Fuel Tank
18.2 litres
Oil Capacity
2.1 litres (1.9 Imperial quarts) with oil filter change
1.8 litres (1.6 Imperial quarts) without oil filter change
Start Method
Solenoid shift type electric starter motor
Gear Pump
A single section 53.0 lpm (11.7 gpm) gear pump powers the lift and trencher hydraulic systems
Hydrostatic Drive
he traction circuit is powered by independent, belt driven hydrostatic in dual closed loop systems. The pumps
are Hydro-gear PG pumps and have service bypass valves for towing. The pumps are mechanically actuated by
the patented Toro TX traction control system, utilizing on-pump neutral centering systems.
Battery
12 volt, BCI group U1 battery with 300 CCA powers the electrical system
Electrical Interlocks
Switches are installed on the machine to ensure the following requirements:
– To start the machine, the auxiliary hydraulic valve must be in neutral
– To start the machine, the traction control must be in neutral
– If the parking brake is ON, the engine will cut out when the attempt is made to drive the machine
Engine Controls
Panel mounted, including the ignition, throttle and choke. The throttle and choke are remote lever/cable
operated
Steering
Toro TX patented control system
Auxiliary
A two-step, spring return (operator presence) lever connects to the trencher spool on the control valve and
actuates the spool for the trencher motor
Headshaft Speed
210 rpm w/ 554 ft/lbs of torque
Track
5.9 inches (15.0 cm) wide-endless nylon reinforced rubber track
Dimensions
Sprocket-drive; 3 road wheels per side. Traction dual hydrostatic pump
Weight
566 kg (1,248 lbs)
Performance
Trench Depth (max)
2 Foot Boom – 61.0 cm (24.0 inches)
3 Foot Boom – 91.0 cm (36.0 inches)
4 Foot Boom – 122.0 cm (48.0 inches)
Trenching Angle: 0-65 degrees
Trench Width: 10.0 – 15.0 cm (4.0 – 8.0 inches)
Auger Diameter: 31.8 cm (12.5 inches)
Auger Length: 32.54 cm (12.81 inches), 41.4 cm (16.3 inches) from centre of chain
Auger Speed: 226 rpm (95% efficiency)
Torque: Approximately 427.1 Nm (315 ft-lbs) at 172.4 bar (2900 psi) – 95% efficiency
Ground Speeds: Forward: 0-5.3 km/h, Reverse: 0-1.7 km/h
Ground Pressure: 28.3 kPa (4.1 psi), 29.7 kPa (4.3 psi) with 3 foot boom
Chain Types
-pitch chain with 4-pitch soil-cup tooth
2-pitch combo Chains (rock and soil)
2-pitch “Shark” welded rock tooth
Warranty
Standard warranty period of 2 years or 1000 hours limited warranty
Images may not reflect dealer inventory or unit specifications.
