Toro Wheelmaster W323 (22318)
The Toro W323 petrol Compact Utility Loaders are specifically designed for tough Australian conditions & are the most reliable compact utility loaders on the market. The labour saving wheeled models give you greater capability & effortless manoeuverbility so you can get more done with less time in a short learning curve-even for inexperienced operators. These machines are built to deliver a high power to-weight ratio in the compact utility loader category. They also have zero-turn manoeverability to handle countless jobs on every site … dig, haul, plant & build.
Model #
22318
Engine
23hp Kohler Command Model CH23S 4 cycle, air cooled 2 cylinder
Power
17.2 kW (23hp) at 3600 rpm (Gross, per SAE J1995)
14.4kW (19.3hp) at 2600 rpm (Gross, per SAE J1349)
Peak Torque
44 Nm (33 ft-lbs) at 2600 rpm (Gross, per SAE J1995)
Fuel Tank
Dual rotationally moulded cross-linked high-density polyethylene fuel tanks with vented caps. A fuel shut-off valve in the fuel line near each tank
Fuel Tank Capacity
Dual 15 litre fuel tanks
Battery
The battery is a 12 volt, BCI group size U1, with 340 CCA minimum at –18 degrees C (0 degrees F) and, 38 minutes reserve capacity at 27 degrees C (80 degrees F) and 25 amp discharge rate per SAE J537L.
Electrical Interlocks
The auxiliary power control lever and traction control levers must be in neutral (centre) position for the engine to start
Hydraulic Pump
Tandem gear pump connected to the engine crankshaft with flexible rubber couplers
Hydraulic Pressure
224 bar (3250 psi) system relief pressure
Hydraulic Flow
Low-Flow Circuit: 15.5 lpm (3.4 gpm) at 3600 rpm
High-Flow Circuit: 40.9 lpm (9.0 gpm) at 3600 rpm
Wheelbase
71.0 cm
Wheels
10.0 x 6.0 inches, five bolt, centre drop, heavy gauge steel
Ground Speeds
0-6.0 km/h (0-3.7 mph) forward or reverse (infinitely variable)
Ground Clearance
15.0 cm front; 15.0 cm rear
Auxiliary Power
Control
A hydraulic valve lever in the front of the right handgrip above the control panel activates hydraulically powered attachments. Pull the lever rearward (non-detented) to operate the attachment in the forward direction, and push the lever forward (detented) to operate the attachment in the reverse direction
Dimensions
Length: 208.8 cm w/bucket 157.5 cm w/o bucket
Width: 104.0 cm standard tyres; 90.0 cm narrow tyres
Height: 123.7 cm
Hinge Pin Height
167.6 cm standard bucket – highest position
Dump Height
119.4 cm with standard bucket
Dump Angle
34° standard bucket
Reach
71.1 cm standard bucket
Maximum Operating
231.7 cm
Height
SAE J818 Rating 50%
234 kg (w/ 91 kg operator)
Tip Capacity
467 kg
Weight
711 kg (1,567 lbs) without attachment
777 kg (1,713 lbs) with standard bucket (model 22409)
Warranty
Standard warranty period of 2 years or 1000 hours limited warranty
Images may not reflect dealer inventory or unit specifications.
